MTZ hydraulics

Reinforced lift cylinder MTZ Belarus C-100 from the renowned company Hydrosila. Cylinder diameter: 100mm, piston rod diameter: 40mm, piston rod stroke: 200mm, distance between pins 515mm. Maximum pressure: 200 bar.

Lift cylinder MTZ Belarus C-100. cylinder diameter: 100mm, piston rod diameter: 40mm, piston rod stroke: 200mm, distance between pins 515mm.

NSZ10 hydraulic gear pump. Series of Polish NSZ pumps produced by Hydrotor Tuchola. Capacity 15L/min (at 1500rpm), pressure nom. 16MPa, left-hand rotation. Straight shaft 6 cutters.

Brand: original Hydrosil product
Shaft: 6 FI 16mm cutters
Working volume: 14 cm3/rev
Direction of rotation: left
Capacity at 1500 rpm: 21 L/min
Maximum RPM: 2500 rpm
Nominal rpm: 1500 rpm
Continuous maximum pressure: 160 bar
Maximum instantaneous pressure: 210 bar

Brand: original Hydrosil product
Shaft: 6 FI 16mm cutters
Working volume: 16 cm3/rev
Direction of rotation: left
Capacity at 1500 rpm: 24 L/min
Maximum rpm: 2500 rpm
Nominal rpm: 1500 rpm
Continuous maximum pressure: 160 bar
Maximum instantaneous pressure: 210 bar

NSZ16 hydraulic gear pump. Series of Polish NSZ pumps produced by Hydrotor Tuchola. Capacity 24L/min (at 1500rpm), pressure nom. 16MPa, left-hand rotation. Straight shaft 6 cutters.

NSZ16 hydraulic gear pump. Series of Polish NSZ pumps manufactured by Hylmet Tuchola. Capacity 24L/min (at 1500rpm), pressure nom. 16MPa, left-hand rotation. Straight shaft 6 cutters.

Hydraulic gear pump NSZ-32A-3L, Ukrainian Hydrosil pump series.
Capacity 54L/min (at 1920rpm), pressure nom. 16MPa, left-hand rotation. Straight shaft 6 cutters. Application: MTZ, Kirovets T-150, LTZ and others.

Complete hydraulics for MF 255 tractor and Ursus 3512 2812 with adapter in place of the under-seat distributor. A 3 section manifold with two floating sections allows control of the rear linkage and boom lift and leveling of the bucket on the front TUR loader. The 1 section manifold mounts in place of the factory manifold on the driver's left side and the factory pipes and rear sockets. Kit includes all components for proper operation of original hydraulics and linkage.

Included:

- adapter mounted in place of the factory manifold under the seat
- 3 section manifold with two floating sections
- mounting bracket for 3-section manifold
- 1 section manifold
- complete board with two EURO sockets
- hydraulic pipes and connectors